Power Supply Design Seminars?registration

Since its introduction in 1977, the Power Supply Design Seminar series provides rich, technical and practical presentations which combine new advanced power supply concepts, basic design principles and "real-world" application examples. Whether this seminar is used to gain fresh knowledge of power supply design, or as a review for those experienced in power supply design, the topics presented will be worthwhile for all levels of expertise.

The PSDS technical series will now be presented through a FREE 6-week webinar series. We are excited to deliver the same, high-quality technical material to you virtually.

Power Supply Design Seminar

Webinar topics:

  • Power-Conversion Techniques for Complying with Automotive Emissions Requirements
  • Power Factor Correction (PFC) Circuit Basics
  • Voltage Regulator Design and Optimization for High-Current, Fast-Slew-Rate Load Transients
  • Common Mistakes in Flyback Power Supplies and How to Fix Them
  • Designing a High-Power Bidirectional AC/DC Power Supply Using SiC FETs
  • Practical EMI Considerations for Low-Power AC/DC Supplies

View complete abstracts

View webinars by region:

Americas

This webinar will be conducted in English. View complete abstracts.

Date
Times
Topic & description
Register
October 8, 2020 10:00-11:15 a.m.?

or?

11:30 a.m. - 12:45 p.m.? (CT)

Power-Conversion Techniques for Complying with Automotive Emissions Requirements?

This topic addresses the unique challenges of designing power converters to pass automotive EMC requirements based on CISPR 25, including background information on the CISPR 25 standard and test setups.?

Register
October 15, 2020 10:00-11:15 a.m.?

or?

11:30 a.m. - 12:45 p.m.? (CT)

Power Factor Correction (PFC) Circuit Basics?

A power factor correction (PFC) circuit intentionally shapes the input current to be in phase with the instantaneous line voltage and minimizes the total apparent power consumed. While this is advantageous to utility companies, a PFC circuit also provides benefits in end applications. This topic presents these benefits, how the PFC circuit can impact the AC-to-DC power-conversion architecture, common PFC circuit types, the benefits/disadvantages of different approaches and a PFC solution selection process based on end-equipment priorities.

Register
October 22, 2020 10:00-11:15 a.m.?

or?

11:30 a.m. - 12:45 p.m.? (CT)

Voltage Regulator Design and Optimization for High-Current, Fast-Slew-Rate Load Transients

This topic breaks down regulator transient response, the effects of load slew rate on COUT selection and two methods of calculating COUT in processor power applications. This topic also includes an overview of regulator output impedance, load lines and the effect of control topology on transient response.

Register
October 29, 2020 10:00-11:15 a.m.?

or?

11:30 a.m. - 12:45 p.m.? (CT)

Common Mistakes in Flyback Power Supplies and How to Fix Them

When you run into a problem in your power-supply design, the odds are that someone else has already solved the same problem on another design. Wouldn’t it be great if you could learn from their mistakes? This topic focuses on some of the most common mistakes in the design and troubleshooting of low-power AC/DC power supplies, specifically focusing on the flyback topology.?

Register
November 5, 2020 10:00-11:15 a.m.?

or?

11:30 a.m. - 12:45 p.m.? (CT)

Designing a High-Power Bidirectional AC/DC Power Supply Using SiC FETs

This topic will review bidirectional AC/DC power supplies, bridgeless power factor correction (PFC), and isolated DC/DC topologies and design challenges. Resolving these challenges entails a deep dive into the total bidirectional AC/DC rectifier solution, including a totem-pole PFC solution and an isolated CLLLC resonant DC/DC converter solution using silicon carbide (SiC) field-effect transistors (FETs). We will also discuss the implementation details of hardware and software in order to easily apply the concepts and results presented.

Register
November 12, 2020 10:00-11:15 a.m.?

or?

11:30 a.m. - 12:45 p.m.? (CT)

Practical EMI Considerations for Low-Power AC/DC Supplies

Electromagnetic interference (EMI) is an essential part of every power-supply design, but too often gets relegated to the end of the design flow, at which point its resolution can be time-consuming, costly and inefficient. This topic will help dispel fears about EMI, and show how to find and fix the issues.

Register

China

This webinar will be conducted in Mandarin.?View?complete abstracts.

Date
Time
Topic & description
Register
October 16, 2020 10:00 - 11:30

Power-Conversion Techniques for Complying with Automotive Emissions Requirements?

This topic addresses the unique challenges of designing power converters to pass automotive EMC requirements based on CISPR 25, including background information on the CISPR 25 standard and test setups.?

Register
October 23, 2020 10:00 - 11:30

Power Factor Correction (PFC) Circuit Basics?

A power factor correction (PFC) circuit intentionally shapes the input current to be in phase with the instantaneous line voltage and minimizes the total apparent power consumed. While this is advantageous to utility companies, a PFC circuit also provides benefits in end applications. This topic presents these benefits, how the PFC circuit can impact the AC-to-DC power-conversion architecture, common PFC circuit types, the benefits/disadvantages of different approaches and a PFC solution selection process based on end-equipment priorities.

Register
October 30, 2020 10:00 - 11:30

Voltage Regulator Design and Optimization for High-Current, Fast-Slew-Rate Load Transients

This topic breaks down regulator transient response, the effects of load slew rate on COUT selection and two methods of calculating COUT in processor power applications. This topic also includes an overview of regulator output impedance, load lines and the effect of control topology on transient response.

Register
November 6, 2020 10:00 - 11:30

Common Mistakes in Flyback Power Supplies and How to Fix Them

When you run into a problem in your power-supply design, the odds are that someone else has already solved the same problem on another design. Wouldn’t it be great if you could learn from their mistakes? This topic focuses on some of the most common mistakes in the design and troubleshooting of low-power AC/DC power supplies, specifically focusing on the flyback topology.?

Register
November 13, 2020 10:00 - 11:30

Designing a High-Power Bidirectional AC/DC Power Supply Using SiC FETs

This topic will review bidirectional AC/DC power supplies, bridgeless power factor correction (PFC), and isolated DC/DC topologies and design challenges. Resolving these challenges entails a deep dive into the total bidirectional AC/DC rectifier solution, including a totem-pole PFC solution and an isolated CLLLC resonant DC/DC converter solution using silicon carbide (SiC) field-effect transistors (FETs). We will also discuss the implementation details of hardware and software in order to easily apply the concepts and results presented.

Register
November 20, 2020 10:00 - 11:30

Practical EMI Considerations for Low-Power AC/DC Supplies

Electromagnetic interference (EMI) is an essential part of every power-supply design, but too often gets relegated to the end of the design flow, at which point its resolution can be time-consuming, costly and inefficient. This topic will help dispel fears about EMI, and show how to find and fix the issues.

Register

Germany

This webinar will be conducted in German.?View?complete abstracts.

Date
Time
Topic & description
Register
September 29, 2020
14:00 - 15:15 Uhr (CET)

Power-Conversion Techniques for Complying with Automotive Emissions Requirements?

This topic addresses the unique challenges of designing power converters to pass automotive EMC requirements based on CISPR 25, including background information on the CISPR 25 standard and test setups.?

Register
October 6, 2020
14:00 - 15:15 Uhr (CET)

Power Factor Correction (PFC) Circuit Basics?

A power factor correction (PFC) circuit intentionally shapes the input current to be in phase with the instantaneous line voltage and minimizes the total apparent power consumed. While this is advantageous to utility companies, a PFC circuit also provides benefits in end applications. This topic presents these benefits, how the PFC circuit can impact the AC-to-DC power-conversion architecture, common PFC circuit types, the benefits/disadvantages of different approaches and a PFC solution selection process based on end-equipment priorities.

Register
October 13, 2020
14:00 - 15:15 Uhr (CET)

Voltage Regulator Design and Optimization for High-Current, Fast-Slew-Rate Load Transients

This topic breaks down regulator transient response, the effects of load slew rate on COUT selection and two methods of calculating COUT in processor power applications. This topic also includes an overview of regulator output impedance, load lines and the effect of control topology on transient response.

Register
October 20, 2020
14:00 - 15:15 Uhr (CET)

Common Mistakes in Flyback Power Supplies and How to Fix Them

When you run into a problem in your power-supply design, the odds are that someone else has already solved the same problem on another design. Wouldn’t it be great if you could learn from their mistakes? This topic focuses on some of the most common mistakes in the design and troubleshooting of low-power AC/DC power supplies, specifically focusing on the flyback topology.?

Register
October 27, 2020
14:00 - 15:15 Uhr (CET)

Designing a High-Power Bidirectional AC/DC Power Supply Using SiC FETs

This topic will review bidirectional AC/DC power supplies, bridgeless power factor correction (PFC), and isolated DC/DC topologies and design challenges. Resolving these challenges entails a deep dive into the total bidirectional AC/DC rectifier solution, including a totem-pole PFC solution and an isolated CLLLC resonant DC/DC converter solution using silicon carbide (SiC) field-effect transistors (FETs). We will also discuss the implementation details of hardware and software in order to easily apply the concepts and results presented.

Register
November 3, 2020 14:00 - 15:15 Uhr (CET)

Practical EMI Considerations for Low-Power AC/DC Supplies

Electromagnetic interference (EMI) is an essential part of every power-supply design, but too often gets relegated to the end of the design flow, at which point its resolution can be time-consuming, costly and inefficient. This topic will help dispel fears about EMI, and show how to find and fix the issues.

Register

Italy

This webinar will be conducted in Italian.?View?complete abstracts.

Date
Time
Topic & description
Register
September 30, 2020
3:00 - 4:15 p.m. (CET)

Power-Conversion Techniques for Complying with Automotive Emissions Requirements?

This topic addresses the unique challenges of designing power converters to pass automotive EMC requirements based on CISPR 25, including background information on the CISPR 25 standard and test setups.?

Register
October 7, 2020 3:00 - 4:15 p.m. (CET)

Power Factor Correction (PFC) Circuit Basics?

A power factor correction (PFC) circuit intentionally shapes the input current to be in phase with the instantaneous line voltage and minimizes the total apparent power consumed. While this is advantageous to utility companies, a PFC circuit also provides benefits in end applications. This topic presents these benefits, how the PFC circuit can impact the AC-to-DC power-conversion architecture, common PFC circuit types, the benefits/disadvantages of different approaches and a PFC solution selection process based on end-equipment priorities.

Register
October 14, 2020 3:00 - 4:15 p.m. (CET)

Voltage Regulator Design and Optimization for High-Current, Fast-Slew-Rate Load Transients

This topic breaks down regulator transient response, the effects of load slew rate on COUT selection and two methods of calculating COUT in processor power applications. This topic also includes an overview of regulator output impedance, load lines and the effect of control topology on transient response.

Register
October 21, 2020 3:00 - 4:15 p.m. (CET)

Common Mistakes in Flyback Power Supplies and How to Fix Them

When you run into a problem in your power-supply design, the odds are that someone else has already solved the same problem on another design. Wouldn’t it be great if you could learn from their mistakes? This topic focuses on some of the most common mistakes in the design and troubleshooting of low-power AC/DC power supplies, specifically focusing on the flyback topology.?

Register
October 28, 2020 3:00 - 4:15 p.m. (CET)

Designing a High-Power Bidirectional AC/DC Power Supply Using SiC FETs

This topic will review bidirectional AC/DC power supplies, bridgeless power factor correction (PFC), and isolated DC/DC topologies and design challenges. Resolving these challenges entails a deep dive into the total bidirectional AC/DC rectifier solution, including a totem-pole PFC solution and an isolated CLLLC resonant DC/DC converter solution using silicon carbide (SiC) field-effect transistors (FETs). We will also discuss the implementation details of hardware and software in order to easily apply the concepts and results presented.

Register
November 4, 2020 3:00 - 4:15 p.m. (CET)

Practical EMI Considerations for Low-Power AC/DC Supplies

Electromagnetic interference (EMI) is an essential part of every power-supply design, but too often gets relegated to the end of the design flow, at which point its resolution can be time-consuming, costly and inefficient. This topic will help dispel fears about EMI, and show how to find and fix the issues.

Register

Japan

This webinar will be conducted in Japanese.?View?complete abstracts.

Date
Time
Topic & description
Register
October 1, 2020 15:00 - 16:00

Power-Conversion Techniques for Complying with Automotive Emissions Requirements?

This topic addresses the unique challenges of designing power converters to pass automotive EMC requirements based on CISPR 25, including background information on the CISPR 25 standard and test setups.?

Register
October 8, 2020 15:00 - 16:00

Power Factor Correction (PFC) Circuit Basics?

A power factor correction (PFC) circuit intentionally shapes the input current to be in phase with the instantaneous line voltage and minimizes the total apparent power consumed. While this is advantageous to utility companies, a PFC circuit also provides benefits in end applications. This topic presents these benefits, how the PFC circuit can impact the AC-to-DC power-conversion architecture, common PFC circuit types, the benefits/disadvantages of different approaches and a PFC solution selection process based on end-equipment priorities.

Register
October 15, 2020 15:00 - 16:00

Voltage Regulator Design and Optimization for High-Current, Fast-Slew-Rate Load Transients

This topic breaks down regulator transient response, the effects of load slew rate on COUT selection and two methods of calculating COUT in processor power applications. This topic also includes an overview of regulator output impedance, load lines and the effect of control topology on transient response.

Register
October 22, 2020 15:00 - 16:00

Common Mistakes in Flyback Power Supplies and How to Fix Them

When you run into a problem in your power-supply design, the odds are that someone else has already solved the same problem on another design. Wouldn’t it be great if you could learn from their mistakes? This topic focuses on some of the most common mistakes in the design and troubleshooting of low-power AC/DC power supplies, specifically focusing on the flyback topology.?

Register
October 29, 2020 15:00 - 16:00

Designing a High-Power Bidirectional AC/DC Power Supply Using SiC FETs

This topic will review bidirectional AC/DC power supplies, bridgeless power factor correction (PFC), and isolated DC/DC topologies and design challenges. Resolving these challenges entails a deep dive into the total bidirectional AC/DC rectifier solution, including a totem-pole PFC solution and an isolated CLLLC resonant DC/DC converter solution using silicon carbide (SiC) field-effect transistors (FETs). We will also discuss the implementation details of hardware and software in order to easily apply the concepts and results presented.

Register
November 5, 2020 15:00 - 16:00

Practical EMI Considerations for Low-Power AC/DC Supplies

Electromagnetic interference (EMI) is an essential part of every power-supply design, but too often gets relegated to the end of the design flow, at which point its resolution can be time-consuming, costly and inefficient. This topic will help dispel fears about EMI, and show how to find and fix the issues.

Register

Korea &?ASEAN

This webinar will be conducted in English with Korean language support.?View complete abstracts.

Date
Time
Topic & description
Korea registration
ASEAN?registration
October 15, 2020 10:00 - 11:30
(GMT+9)

Power-Conversion Techniques for Complying with Automotive Emissions Requirements?

This topic addresses the unique challenges of designing power converters to pass automotive EMC requirements based on CISPR 25, including background information on the CISPR 25 standard and test setups.?

Korea registration ASEAN registration
October 22, 2020 10:00 - 11:30
(GMT+9)

Power Factor Correction (PFC) Circuit Basics?

A power factor correction (PFC) circuit intentionally shapes the input current to be in phase with the instantaneous line voltage and minimizes the total apparent power consumed. While this is advantageous to utility companies, a PFC circuit also provides benefits in end applications. This topic presents these benefits, how the PFC circuit can impact the AC-to-DC power-conversion architecture, common PFC circuit types, the benefits/disadvantages of different approaches and a PFC solution selection process based on end-equipment priorities.

Korea registration ASEAN registration
October 29, 2020 10:00 - 11:30
(GMT+9)

Voltage Regulator Design and Optimization for High-Current, Fast-Slew-Rate Load Transients

This topic breaks down regulator transient response, the effects of load slew rate on COUT selection and two methods of calculating COUT in processor power applications. This topic also includes an overview of regulator output impedance, load lines and the effect of control topology on transient response.

Korea registration ASEAN registration
November 5, 2020 10:00 - 11:30
(GMT+9)

Common Mistakes in Flyback Power Supplies and How to Fix Them

When you run into a problem in your power-supply design, the odds are that someone else has already solved the same problem on another design. Wouldn’t it be great if you could learn from their mistakes? This topic focuses on some of the most common mistakes in the design and troubleshooting of low-power AC/DC power supplies, specifically focusing on the flyback topology.?

Korea registration ASEAN registration
November 12, 2020 10:00 - 11:30
(GMT+9)

Designing a High-Power Bidirectional AC/DC Power Supply Using SiC FETs

This topic will review bidirectional AC/DC power supplies, bridgeless power factor correction (PFC), and isolated DC/DC topologies and design challenges. Resolving these challenges entails a deep dive into the total bidirectional AC/DC rectifier solution, including a totem-pole PFC solution and an isolated CLLLC resonant DC/DC converter solution using silicon carbide (SiC) field-effect transistors (FETs). We will also discuss the implementation details of hardware and software in order to easily apply the concepts and results presented.

Korea registration ASEAN registration
November 19, 2020 10:00 - 11:30
(GMT+9)

Practical EMI Considerations for Low-Power AC/DC Supplies

Electromagnetic interference (EMI) is an essential part of every power-supply design, but too often gets relegated to the end of the design flow, at which point its resolution can be time-consuming, costly and inefficient. This topic will help dispel fears about EMI, and show how to find and fix the issues.

Korea registration ASEAN registration

Rest of Europe

This webinar will be conducted in English.?View complete abstracts.

Date
Time
Topic & description
Register
October 1, 2020
2:00 - 3:15 p.m. (CET)

Power-Conversion Techniques for Complying with Automotive Emissions Requirements?

This topic addresses the unique challenges of designing power converters to pass automotive EMC requirements based on CISPR 25, including background information on the CISPR 25 standard and test setups.?

Register
October 8, 2020
2:00 - 3:15 p.m. (CET)

Power Factor Correction (PFC) Circuit Basics?

A power factor correction (PFC) circuit intentionally shapes the input current to be in phase with the instantaneous line voltage and minimizes the total apparent power consumed. While this is advantageous to utility companies, a PFC circuit also provides benefits in end applications. This topic presents these benefits, how the PFC circuit can impact the AC-to-DC power-conversion architecture, common PFC circuit types, the benefits/disadvantages of different approaches and a PFC solution selection process based on end-equipment priorities.

Register
October 15, 2020
2:00 - 3:15 p.m. (CET)

Voltage Regulator Design and Optimization for High-Current, Fast-Slew-Rate Load Transients

This topic breaks down regulator transient response, the effects of load slew rate on COUT selection and two methods of calculating COUT in processor power applications. This topic also includes an overview of regulator output impedance, load lines and the effect of control topology on transient response.

Register
October 22, 2020
2:00 - 3:15 p.m. (CET)

Common Mistakes in Flyback Power Supplies and How to Fix Them

When you run into a problem in your power-supply design, the odds are that someone else has already solved the same problem on another design. Wouldn’t it be great if you could learn from their mistakes? This topic focuses on some of the most common mistakes in the design and troubleshooting of low-power AC/DC power supplies, specifically focusing on the flyback topology.?

Register
October 29, 2020
2:00 - 3:15 p.m. (CET)

Designing a High-Power Bidirectional AC/DC Power Supply Using SiC FETs

This topic will review bidirectional AC/DC power supplies, bridgeless power factor correction (PFC), and isolated DC/DC topologies and design challenges. Resolving these challenges entails a deep dive into the total bidirectional AC/DC rectifier solution, including a totem-pole PFC solution and an isolated CLLLC resonant DC/DC converter solution using silicon carbide (SiC) field-effect transistors (FETs). We will also discuss the implementation details of hardware and software in order to easily apply the concepts and results presented.

Register
November 5, 2020
2:00 - 3:15 p.m. (CET)

Practical EMI Considerations for Low-Power AC/DC Supplies

Electromagnetic interference (EMI) is an essential part of every power-supply design, but too often gets relegated to the end of the design flow, at which point its resolution can be time-consuming, costly and inefficient. This topic will help dispel fears about EMI, and show how to find and fix the issues.

Register

Taiwan

This webinar will be conducted in Mandarin.?View complete abstracts.

Date
Time
Topic & description
Register
October 8, 2020 10:00 - 11:30

Power-Conversion Techniques for Complying with Automotive Emissions Requirements?

This topic addresses the unique challenges of designing power converters to pass automotive EMC requirements based on CISPR 25, including background information on the CISPR 25 standard and test setups.?

Register
October 15, 2020 10:00 - 11:30

Power Factor Correction (PFC) Circuit Basics?

A power factor correction (PFC) circuit intentionally shapes the input current to be in phase with the instantaneous line voltage and minimizes the total apparent power consumed. While this is advantageous to utility companies, a PFC circuit also provides benefits in end applications. This topic presents these benefits, how the PFC circuit can impact the AC-to-DC power-conversion architecture, common PFC circuit types, the benefits/disadvantages of different approaches and a PFC solution selection process based on end-equipment priorities.

Register
October 22, 2020 10:00 - 11:30

Voltage Regulator Design and Optimization for High-Current, Fast-Slew-Rate Load Transients

This topic breaks down regulator transient response, the effects of load slew rate on COUT selection and two methods of calculating COUT in processor power applications. This topic also includes an overview of regulator output impedance, load lines and the effect of control topology on transient response.

Register
October 29, 2020 10:00 - 11:30

Common Mistakes in Flyback Power Supplies and How to Fix Them

When you run into a problem in your power-supply design, the odds are that someone else has already solved the same problem on another design. Wouldn’t it be great if you could learn from their mistakes? This topic focuses on some of the most common mistakes in the design and troubleshooting of low-power AC/DC power supplies, specifically focusing on the flyback topology.?

Register
November 5, 2020 10:00 - 11:30

Designing a High-Power Bidirectional AC/DC Power Supply Using SiC FETs

This topic will review bidirectional AC/DC power supplies, bridgeless power factor correction (PFC), and isolated DC/DC topologies and design challenges. Resolving these challenges entails a deep dive into the total bidirectional AC/DC rectifier solution, including a totem-pole PFC solution and an isolated CLLLC resonant DC/DC converter solution using silicon carbide (SiC) field-effect transistors (FETs). We will also discuss the implementation details of hardware and software in order to easily apply the concepts and results presented.

Register
November 12, 2020 10:00 - 11:30

Practical EMI Considerations for Low-Power AC/DC Supplies

Electromagnetic interference (EMI) is an essential part of every power-supply design, but too often gets relegated to the end of the design flow, at which point its resolution can be time-consuming, costly and inefficient. This topic will help dispel fears about EMI, and show how to find and fix the issues.

Register
永久黄网站色视频免费_黄色网站在线观看_成年美女黄的视频网站